Pau Ferro & Pomelle Sapele custom electric guitar neck fits stratocaster

Description

Pau Ferro, aka Bolivian Rosewood(fretboard)  with African Curly Pomelle Sapele
(shaft) and special inlay of Pomelle Sapele on peghead  to fit s- type bolt on
Electric Guitar Neck.
Please view the supersize photos to examine details of this semi-finished guitar neck, the photos are a critical part of the description. s-type mount configuration(which can also be used on many tele's). Item is rough sanded at 100 grit will still require final sanding, fitment, fretting and final finishing with finish of your choice. Truss rod is purposefully removable(will slide out from rear) to make replacement easier should it someday require replacement. US made.
Neck is wetted with mineral spirits to simulate a finish. Modern construction(no skunk stripe, fretboard and neck body joined with heel mounted truss rod). Neck has a light coat of anchorseal to help show the figure. Figure of this Sapele is very 3 dimensional and difficult to photograph. Genuine mop dots. Facebook GTT Tonewoods
Pau Ferro(Bolivian Rosewood) fretboard
Quartersawn African Figured Sapele shaft
Headstock inlaid with special figure pomelle Sapele
nominally sized 1 and 11/16 width at nut
12 in. Radius Fretboard
CNC produced, Pre-slotted, Pau Ferro  fretboard, 25.5 scale..
.023 in. Standard Fret-slots
Standard  4- Hole Array for  Neck Mounting
Installed 2-Way Adjustable Truss Rod (Heel location)
genuine white mop position markers, no side dots
flat bottom nut slot purposefully milled at 0.120 to allow precise final sand/fit of nut for dead solid nut fit(you can file slot slightly to fit exactly a 1/8 nut).
six, inline, 0.390 tuner holes
wiped with thin coat of anchorseal to help show figure
weighs 1 pound, 6.2 oz on my scale
22 fret slots